Chain guide, also called chain guide, is a static pressure guide used to support and guide the chain, reduce chain friction, reduce noise, and enhance the service life of the chain. Linear chain guides are also commonly referred to as linear chain guides. Such mechanical parts are fine parts, so if you are not careful when using them, the parts will be damaged.
1. To avoid the state of rust
To avoid such a state of use, first of all avoid directly using your hands to pick up such accessories, and the precise method is to clean your hands before use to remove stains and sweat, and then you can apply it on the linear chain guide rail. Some mineral oils and then other operations. Especially in the humid summer, we must do a good job of moisture-proof treatment.
2. Requirements for use
The linear chain guide rail also has relatively high requirements for the use of the environment. In our production environment, there is not only visible dust, but also some invisible dust. Once these dust fall into the linear chain guide rail , there will be some adverse usage reactions, such as increasing the wear of the chain guide rail, increasing the vibration force of the machine, and increasing the noise, which will lead to other usage problems.
3. Installation matters
For the installation of the linear chain guide, it is also necessary to be careful and careful. During the installation, there should be no strong punching state, and heavy objects should not be used to install and knock the chain guide. Once the installation is improper, take measures A technical move to install.
The linear chain guide can be understood as a kind of rolling guide, which is an infinite rolling cycle of steel balls between the slider and the chain guide, so that the load platform can easily move linearly with high precision along the chain guide, and the friction coefficient is reduced to normal. One-fifth of the traditional sliding guide can easily achieve high positioning accuracy.